Status displays 2.4 – HEIDENHAIN TNC 128 (77184x-02) User Manual
Page 73
Status displays
2.4
2
TNC 128 | User's Manual HEIDENHAIN Conversational Programming | 5/2014
73
Coordinate transformations (TRANS tab)
Soft key
Meaning
Name of the active datum table
Active datum number (
#), comment from the
active line of the active datum number (
DOC)
from Cycle 7
Active datum shift (Cycle 7); The TNC displays
an active datum shift in up to 3 (5) axes
Mirrored axes (Cycle 8)
Active scaling factor/factors (Cycles 11 / 26);
The TNC displays an active scaling factor in up
to 6 axes
Scaling datum
Coordinate transformation cycles: see page 447
Displaying Q parameters (QPARA tab)
Soft key
Meaning
Display the current values of the defined Q
parameters
Display the character strings of the defined
string parameters
Press the
Q PARAMETER LIST soft key. The TNC
opens a pop-up window in which you can enter
the desired range for display of the Q parameters
or string parameters. Multiple Q parameters are
entered separated by commas (e.g. 1,2,3,4). To
define display ranges, enter a hyphen (e.g. 0-14).