Intel STL2 - Manual (Page 2)

Revision History STL2 Server Board TPS
ii
Revision History
Date Revision
Number
Modifications
6/15/00 0.5 Initial release.
6/20/00 0.6 Updated connector reference designators
7/7/00 0.61 Updated silkscreen reference designators to agree with STL2 FAB2.
Removed figure 2-3, IB6566 IRQ routing diagram. Added BIOS recovery
jumper information. Corrected grammar / spelling errors. Updated table 5-1,
STL2 Hardware Sensors, per recent information
8/24/00 0.7 Updated Section 5: Jumpers and Connectors, per modifications to the STL2
Fab3 Silver boards. Updated Section 4.2: BIOS Setup, per modifications
included in BIOS Release 1.1. Added power consumption information to
Section 6.
9/22/00 1.0 Released version
Disclaimers
Information in this document is provided in connection with Intel
®
products. No license, express
or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel
assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating
to sale and/or use of Intel products including liability or warranties relating to fitness for a
particular purpose, merchantability, or infringement of any patent, copyright or other intellectual
property right. Intel products are not intended for use in medical, life saving, or life sustaining
applications. Intel may make changes to specifications and product descriptions at any time,
without notice.
Designers must not rely on the absence or characteristics of any features or instructions
marked "reserved" or "undefined." Intel reserves these for future definition and shall have no
responsibility whatsoever for conflicts or incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not
finalize a design with this information. Revised information will be published when the product
is available. Verify with your local sales office that you have the latest datasheet before
finalizing a design.
The STL2 platform may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on
request.
Copyright © Intel Corporation 2000. *Other brands and names are the property of their
respective owners.