Intel STL2 - Manual (Page 69)

STL2 Server Board TPS Jumpers and Connectors
Revision 1.0 5-61
5. Jumpers and Connectors
STL2 Server Board Jumper and Connector Locations
The following figure shows the location of the jumper blocks and connectors on the STL2
Server board.
Figure 5-1. STL2 Server Board Jumper and Connector Locations
Jumper and connector location key for Figure 5-1:
A. Main power connector (P33)
B. VRM socket (P32)
C. Auxiliary power connector (P34)
D. Primary processor (P13)
E. Secondary processor (P14)
F. Secondary processor heatsink fan connector (P36)
G. Power supply signal connector (P37)
H. DIMM slots (P15-P18)
I. IDE connector (P19)
J. Floppy drive connector (P20)
K. Two pin speaker connector (P31)