Intel STL2 - Manual (Page 93)

STL2 Server Board TPS Regulatory and Integration Information
Revision 1.0 8-85
8. Regulatory and Integration Information
8.1 Regulatory Compliance
The STL2 server board complies with the following safety standard requirements.
Table 8-1. Safety Regulations
Regulation Title
UL 1950/CSA950 Bi-National Standard for Safety of Information Technology Equipment
including Electrical Business Equipment. (USA and Canada)
EN 60950 The Standard for Safety of Information Technology Equipment including
Electrical Business Equipment. (European Community)
IEC60 950 The Standard for Safety of Information Technology Equipment including
Electrical Business Equipment. (International)
EMKO-TSE (74-SEC) 207/94 Summary of Nordic deviations to EN 60950. (Norway, Sweden, Denmark,
and Finland)
EU Low Voltage Directive 73/23/ECC Compliance to EU LV Directive via EN60 950 / IEC 60950
The STL2 server board has been tested and verified to comply with the following EMC
regulations when installed in a compatible Intel host system. For information on Intel
compatible host system(s), refer to Intel’s Server Builder website, or contact your local Intel
representative.
Regulation Title
FCC – Class A Title 47 of the Code of Federal Regulations, Parts 2 and 15, Subpart B, pertaining
to unintentional radiators. (USA)
ICES-003 – Class A Interference-Causing Equipment Standard, Digital Apparatus, Class A (including
CRC c. 1374) (Canada).
CISPR 22 Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (International)
VCCI – Class A Implementation Regulations for Voluntary Control of Radio Interference by Data
Processing Equipment and Electronic Office Machines. (Japan)
EN55022 Limits and methods of measurement of Radio Interference Characteristics of
Information Technology Equipment. (Europe)
EN55024 Generic Immunity Standard; currently compliance is determined via testing to IEC
801-2, -3, and -4. (Europe)
EU EMC Directive
89/336/EEC Compliance to EU EMC Directive via EN55022 & EN55024
BSMI (CNS13438) – Class A Taiwan EMC Regulations based on CISPR 22
C-tick (AS/NZS 3548) Australia & New Zealand EMS Regulations based on CISPR 22
This server board assembly has the following required certification type markings:
•
UL Joint Recognition Mark: Consists of small c (for Canada) followed by a stylized
backward UR and followed by a small US (USA) (on component side).