Sk series – General Pump SK Repair Manual User Manual
Page 27
Advertising
GENERAL PUMP
A member of the Interpump Group
SK SERIES
Page 27
Remove the anti-rotation shim from under the shank of the central connecting rod.
Mount the two bearing covers (with their O-rings) (1, fig. 90) using 6 M8x20 screws (1, fig. 91). Set the
screws with a torque wrench, as shown in Section 3.
Insert the O-ring into the rear cover (1, fig. 92) and affix it to the casing using 10 M8 X 20 screws (1, fig. 93).
Set the screws with a torque wrench, as shown in Section 3).
Mount the radial seal ring onto the oil seal cover (1, fig. 94) using a pad (part #F27910900).
Advertising