Installing the configurator – IDEC DATAVS1 Series User Manual
Page 13
Advertising
Instruction Manual
SVS1 Series
8
4.4.
Installing the configurator
There is a slot on the back of the VSC configurator which allows the user to connect the device to a
DIN Rail. During installation it is therefore sufficient to wedge the configurator on the rail and block it in
place using the two white locking clips.
It is also possible to install the VSC configuratore on a panel. All the accessories for this kind
of installation are included in the package.
DIN Rail
Locking clips
Slot for the
DIN Rail
Advertising