IDEC DATAVS1 Series - Manual (Page 64)

Instruction Manual SVS1 Series
59
We now go to Adjust mode by pressing the STATUS button. Let's increase the expected value
slightly using the ARROW UP button as we want exact replicas of the original logo.
Now press the STATUS button to enter Monitor Mode and check that the tool functions properly.
The sensor now behaves correctly. As the result is satisfying, press STATUS again and move on
to defining the behaviour of the outputs.
Let's associate output 1 to the Part OK behaviour and
output 2 to the Part Fail behaviour. Press TEACH to save the modifications.
Now let's save the bank on the sensor. Enter the Bankset menu and save the inspection in
memory bank 1.