IDEC DATAVS1 Series - Manual (Page 37)

Instruction Manual SVS1 Series
32
To select the memory bank you wish to use, move the cursor using the ARROW buttons and press
the SET button to confirm.
When you are on the selected memory bank, you can perform three different operations which can be
recalled using the icons at the bottom of the screen:
• Load: This loads the inspection memorised on the selected bank.
Press the SET button to load the selected inspection onto the device. After a few seconds,
a confirmation message is displayed on the device. After pressing SET again you will be
asked if you wish to use the loaded inspection as the default inspection the next time the
device is rebooted. It is possible to select the option using the ARROW buttons and then
press SET to confirm.
• Save: this saves the current inspection to the selected bank.
Press the SET button to save the current inspection onto the device. If the selected slot is
not free, a message will appear on the screen asking if you wish to overwrite the inspection
currently saved in this databank. Use the ARROW and SET buttons to scroll and select the
option. After a few seconds, you will be asked if you wish to use the loaded inspection as
the default inspection the next time the device is rebooted. It is possible to select the option
using the ARROW buttons and then press SET to confirm.