IDEC DATAVS1 Series - Manual (Page 41)

Instruction Manual SVS1 Series
36
It is now possible to enter a new password consisting in a sequence of four buttons on the keyboard.
Once the password has been entered, press SET to confirm. The password status switches from
Disabled
to Enabled.
When the password is enabled, the user can perform either of the following operations:
•
Modify the password:
To modify the current password, select the Modify option and then press SET to confirm.
The device will request the user to enter the current password first. Once the old password
has been entered, a new one can be entered too.
•
Disabling the password
To disable the password option, select the Disable option and then press SET to confirm.
The device will request the user to enter the current password enabled. Enter the
password and press SET. The password status switches from Enabled to Disabled.