IDEC DATAVS1 Series - Manual (Page 23)

Instruction Manual SVS1 Series
18
If you wish to modify the ROI size, select the Resize ROI from the Setup menu (using the SET button
again). It is now possible to increase or decrease the ROI size using the ARROW buttons. The size
(expressed in pixels) of the current ROI are displayed at the bottom of the screen. Once you have
achieved the desired size, press the TEACH button to save the settings and return to the Setup menu.
Press the ESC button to return to the Setup menu without saving the modifications (the system will
request confirmation on the saving option).
When the ROI position and size are complete, you can move on to the next configuration step. To
proceed, press the STATUS button. The Set/Net LED switches off and the Adjust LED lights up.