Configuring call home notification, 62 email event notification setup dialog box – HP StorageWorks 2.140 Director Switch User Manual

Page 107

Advertising
background image

HA-Fabric Manager user guide 105

The Email Event Notification Setup dialog box is displayed (

Figure 62

).

Figure 62

Email Event Notification Setup dialog box

2.

Select the Enable Email Event Notification check box.

3.

Enter the appropriate information in the following boxes:
E-mail Server—IP address or name of the SMTP server
Reply Address—Recipient’s e-mail address
Summary Interval—Amount of time between each notification

CAUTION:

Specifying a short interval can cause the recipient’s e-mail inbox to fill quickly.

4.

Select one of the following options:
• Select Send to and enter an e-mail address for a user to send a test e-mail to a specific user.
• Select Send to all users enabled for notification to send a test e-mail to all users designated

to receive notification.

5.

Click Send Test Email to test the e-mail server.
A message is displayed indicating if the server was found.

6.

Click User List to specify which users receive e-mail notifications.
The HAFM Server Users dialog box is displayed.

7.

Select the check box in the Email column for each user you want to receive notification.

8.

Click OK.

Notifications are combined into a single e-mail and sent at the specified interval setting. An interval

setting of 0 (zero) causes notifications to be sent immediately.

Configuring Call Home notification

When you configure Call Home notification, the appliance automatically dials in to a support

center to report system problems. See the HA-Fabric Manager Appliance installation guide for

details.

Advertising