HP StorageWorks 2.140 Director Switch - Manual (Page 259)

HA-Fabric Manager user guide 263
21. Click Done.
Running HAFM
Run the HAFM program from the directory in which you saved it (the default is a subdirectory
named
HAFM
in your home directory).
1. In the Terminal window, enter
cd HAFM
.
2. Press Enter.
3. Enter
HAFM_Manager
.
4. Press Enter.
The HAFM application opens.
HP-UX, AIX, and Linux systems
This section describes the procedures for installing the HAFM on a remote HP-UX, AIX, or Linux
workstation.
Requirements
The download and installation process requires the use of a PC with the following minimum system
requirements:
• Operating system (one of the following):
• HP-UX 11.0a
• AIX version 5.1
• Red Hat 9.0 kernel v.2.4.20-8
• Red Hat 8.0 kernel v.2.4.18-14
• Red Hat Enterprise Linux ES 3.0
• Processor:
• 400 MHz HA PA-RISC
• 333 MHz Power3-II
• 1 GHz Intel Pentium III
• 512 MB RAM
• 350 MB disk space
• Video card supporting 256 colors at 800 x 600 resolution
• Ethernet network adapter
• Java-enabled web browser, such as Microsoft Internet Explorer (version 4.0 or later) or Netscape
Navigator (version 4.6 or later)
Newer versions of HAFM or Element Managers installed on the HAFM appliance are automatically
downloaded when the remote clients log in to the HAFM appliance.
Installation procedure
1. Open a Terminal window by choosing Terminal from the Personal Applications subpanel.