HP StorageWorks 2.140 Director Switch User Manual
Page 260
Configuring remote workstations
264
2.
At the prompt (#), enter
netscape
and then press Enter.
The Netscape browser opens.
3.
Obtain the HAFM appliance address from your network administrator.
4.
Enter the address of the HAFM appliance in the Location (or Address) box of the browser, and
press Enter.
The HP StorageWorks HAFM page is displayed.
5.
Read the instructions for your operating system.
6.
If a reference to fixes is made, click the hyperlink and verify that your system is up to date.
7.
On the HAFM page, click Begin HP-UX Installation/Begin AIX Installation/Begin Linux
Installation to begin the installation process.
8.
If you have read the security agreement information and wish to continue, click Yes.
The HP High Availability Fabric Manager Available Installers page is displayed (
9.
Click Download.
The File Download dialog box is displayed (
).
10.
Click Open.
The system begins downloading the HAFM installer. When the download is complete, the
Introduction window is displayed.
11.
A Save As dialog box is displayed with the default file name
hpClientInstall.bin
.
Change the file name to
/home/hpClientInstall.bin
.
12.
Click OK.
The software download begins.
13.
Close the browser window.
14.
In the Terminal window:
a. Enter
cd home
.
b. Press Enter.
c. Enter
sh
hpClientInstall.bin
.
d. Press Enter.
15.
When the download is complete, the Introduction window is displayed.
Be aware that there can be a considerable delay.
16.
Click Next.
The License Agreement window is displayed.
NOTE:
At any time, you can return to the previous page by clicking Previous or quit the Installation
by clicking Exit.
17.
If you have read the license agreement and agree to accept the terms, click I accept the terms of
the License Agreement.
18.
Click Next.
The Important Information window is displayed.