HP StorageWorks 2.140 Director Switch - Manual (Page 64)

Using the HAFM application 62
where xx is the current release number.
c. Select SM.bat file in the Locate the Browser dialog box, and then click Select File.
d. Click OK.
Configuring Call Home for remote dial-in
To run the Call Home service:
• For remote dial-in to work, RAS must be installed and configured on your appliance.
• The modem must be sent to auto answer.
• A new user, srvacc, must be configured with Administrator privileges.
• The PC must be configured for dial-in connections with the correct IP addresses.
• The srvacc user must be allowed to connect via dial-in.
Miscellaneous
If a web server is running on the PC, such as IIS, then the default embedded http server port needs
to be configured for another port by adding the following property to the
C:\Program
Files\HAFM 8.5\resources\server\Config.properties
file:
Smp.server.httpserverport=<port number>
Multiple network interface cards
A second Ethernet NIC may be desirable in the PC to isolate the switches in your SAN from the
public network. If there are any connection issues with the dual NICs, a configuration file
(
C:\Program Files\HAFM 8.5\resources\Server\config.properties
) can be
modified to force the appliance to look at a specific IP address.
1. Add the following parameter to the file:
ServerRmIpAddress=xxx.xxx.xxx.xxx
where
xxx.xxx.xxx.xxx
is the IP address of the NIC card that you want the client connections
to come in on.
2. Follow the instructions provided by the InstallShield wizard.