HP StorageWorks 2.140 Director Switch - Manual (Page 34)

Using the HAFM application 32
3. The HAFM appliance name is displayed in the Server Name box.
4. Enter your user ID and password.
5. Select whether you want the application to remember your password the next time you log in.
6. Click Login.
Logging out of HAFM
To log in to a different HAFM appliance, you must first log out of the current appliance.
1. Select SAN > Log Out.
The HAFM Log In dialog box is displayed ( Figure 3 on page 31).
You are logged out of the appliance and the HAFM Log In dialog box is displayed ( Figure 3 ).
Adding an appliance
1. Select SAN > Log Out.
The HAFM Log In dialog box is displayed (
Figure 3 on page 31).
2. To add a new appliance, enter the appliance network address in the Network Address box.
TIP: If the appliance and client are on the same machine, you can type localhost in the Network
Address box.
NOTE: You must have an established login and password account on the new appliance.
The appliance name is displayed in the Server Name box.
3. Enter your user ID and password.
4. Specify whether you want the application to remember your password the next time you log in.
5. Click Login.
The application logs in to the appliance located at the specified network address.
Removing an appliance
You can remove appliances from the list in the Log In dialog box.
1. If you are logged in to an appliance, select SAN > Log Out. If you do not have the application
open, start the application.
The HAFM Log In dialog box is displayed (
Figure 3 on page 31).
2. Select the appliance you want to remove from the Network Address list.
The selected appliance IP address is displayed in the Network Address box.
IMPORTANT: The appliance will be deleted without confirmation.