HP StorageWorks 2.140 Director Switch - Manual (Page 177)

HA-Fabric Manager user guide 175
Removing the current HAFM appliance
To remove the current HAFM appliance, do one of the following:
• If the server ID is defined only on the HAFM appliance and has not been added to the switch,
the current appliance can be removed by not selecting the Include current server check box. If
the current appliance is selected, Remove is disabled.
• If the server ID and CHAP Secret have been added to the switch, highlight the current appliance
and click Remove. If the current appliance is removed from the Permitted Software List, the
Include current server check box is enabled.
Editing the CHAP Secret for the current HAFM appliance
To edit the CHAP Secret for the current HAFM appliance:
1. Select the appliance and click Edit.
A message is displayed, indicating that you must use the Server Properties dialog box to edit the
current appliance’s properties.
2. Click OK to display the Server Properties dialog box.
3. Edit the server ID or CHAP Secret.
If you change the server ID, a message is displayed, indicating that when you change the server
ID, you must also update the authenticating switches or the appliance becomes out-of-sync and
the switches cannot be managed.
4. Click OK to return to the Software tab.
Adding an additional HAFM appliance
1. To add another HAFM appliance to the Permitted Software List, click Add.
The Add or Edit Software ID and CHAP Secret dialog box is displayed (
Figure 106 ).
Figure 106 Add or Edit Software ID and CHAP Secret dialog box
2. Enter a unique Software ID.
3. Click OK.
The Software tab is displayed with an asterisk next to the current server ID on the Permitted
Software List.
Editing the CHAP Secret for another HAFM appliance
To edit the CHAP Secret for another HAFM appliance in the Permitted Software List:
1. Select the HAFM appliance and click Change.
The Add or Edit Software ID and CHAP Secret dialog box is displayed.