HP StorageWorks 2.140 Director Switch - Manual (Page 81)

HA-Fabric Manager user guide 79
NOTE: The Product Type and Access tab may not be available in all situations.
1. Select Discover > Setup.
The Discover Setup dialog box is displayed (
Figure 32 on page 72).
2. Click Add.
The Address Properties dialog box is displayed (
Figure 35 on page 76).
3. Click the Product Type and Access tab. The Product Type and Access tab is displayed
( Figure 37 ).
Figure 37 Address Properties dialog box (Product Type and Access tab)
4. Select the type of device from the Product Type list.
• If you select
CIM/WBEM Services
from the Product Type list, enter a name in the Name
Space box then go to step 14.
• If you select
Clariion
from the Product Type list, go to step 16.
• If you select
HDS
from the Product Type list, go to step 14.
• If you select
HP XP Storage
from the Product Type list, go to step 14.
• If you select
IBM ESS Storage
from the Product Type list, go to step 14.
• 1If you select
NetApp
from the Product Type list, do the following:
• Select the product protocol from the Protocol list.
• Enter the product DFM port number in the DFM Port box.
• Go to step 14.
• If you select
<not specified>
from the Product Type list, go to step 16.
• If you select
Switch
from the Product Type list, go to step 14.
• If you select
Symmetrix
from the Product Type list, go to step 16.
5. Enter a user ID in the User ID box.
6. Enter the password in the Password and Retype Password boxes.
7. Click OK.