Vinpower Digital Titan Lightscribe Autoloader - Manual (Page 15)

13
13.4 Max Audio, VCD & CDG Speed
Due to the lack of error checking mechanism for Audio CD, Video CD and CD+G format,
duplicating them at too high a speed can cause frequent errors like glitches and skips. Use
this setting to adjust the maximum duplication speed for Audio, Video CD and CD+G
format to ensure reliable duplication for such formats.
13.5 Buzzer
Use this setting to choose whether you want to hear a beep when you press a button and
when a task has been completed or have it turned off for silent operation.
13.6 Startup Menu
Use this setting to choose which menu you would like to see first when you turn on the
autoloader.
13.7 Screen Saver
Use this setting to enable or disable the Screen Saver feature. When this is enabled, a
screen saver is displayed whenever your autoloader has been idle for a set period of time.
13.8 Counter
Use the Counter menu to enable or disable the Counter feature. The counter tells you how
many discs have copied and how many discs are left to go during the duplication process
stopping the job once the desired number of copies has been made.
13.9 DVD+R Compatibility Mode
This feature allows you to turn the DVD+R High Compatibility Mode feature ON or OFF.
The purpose of this feature is to increase the compatibility of DVD+R media with a broader
range of DVD Video players.
13.10 ISRC
This option will allow you to enable/disable copying the ISRC code of an Audio CD. ISRC is
the serial number of the audio track that uniquely identifies the song in that audio track.
This ISRC code is commonly found in commercial Audio CDs and rarely seen on
homemade Audio CDs. By enabling this feature, the duplication performance will be
lowered.
13.11 Disable Drives
Use this utility to allow the system to disable certain drives/trays when certain drives/trays
are producing high failure rates.
13.12 Overburn
Overburn is a burning method to bypass the capacity limitations of the media to burn further
out onto the edge of the media. This can result in slightly higher storage capacity; however,
it has also been known to have compatibility playback issues. Please use it with caution.
Note: This works only for CD and BD media. Due to physical limitations of the DVD
media, it is not possible to record more than the advertised capacity.
13.13 Max Failure per Job
Use this setting to set the maximum number of failures the autoloader is allowed per job.
Once the maximum is reached, the job will be stopped.
13.14 Max Failure per Drive
Use this setting to set the maximum number of failures each drive is allowed during the job.
Once the maximum is reached for any particular drive, said drive will be disabled for the
remainder of the job. The autoloader will continue to function using the remaining drives.
13.15 BD Safe Copy Menu
Use this setting to choose whether you want to show “BD Safe Copy” on the main menu, or
not.