LulzBot TAZ Pro S 3D Printer - Manual (Page 16)

14 | LulzBot TAZ Pro S
During the printer startup cycle, the X-axis will move to the top of the frame and make contact with the left and
right limit switches in order to level the X-axis. Make sure the print area is free of obstructions. This process also
completes before each print.
i
3.10 Verify that the power switch
on the front of the TAZ Pro S is in the
OFF position.
3.11 Plug in the included USB cable,
connecting the TAZ Pro S to a
computer.
3.13 Flip the power switch to the
ON position to turn on the TAZ Pro S.
3.12 Plug in the AC power
connection.
3.10
3.11
3.12
3.13