LulzBot TAZ Pro S 3D Printer User Manual
Page 18
16 |
LulzBot TAZ Pro S
4.2
Launch Cura LulzBot Edition. The
Add Printer
menu will automatically appear. Select
LulzBot TAZ
Pro
and
M175 | 0.5mm
, then click
Add Printer
. Existing users should select the
Settings
drop-down menu,
Printer
, then
Add Printer
. On the next menu that appears, click
Finish
to complete the printer setup. Cura
LulzBot Edition is now ready for use with your LulzBot TAZ Pro S.
4.3
New firmware is continuously being developed to add new functionality and ensure your LulzBot TAZ
Pro S is creating the best quality prints. With the USB cable connected to your printer and a computer with
Cura LulzBot Edition installed, update the printer firmware by clicking the
Settings
drop-down menu and
selecting
Printer,
then
Manage Printers
. With
LulzBot TAZ Pro/M175 | 0.5mm
highlighted, click
Upgrade
Firmware
and follow the prompts to install the latest firmware.