LulzBot TAZ Pro S 3D Printer - Manual (Page 19)

LulzBot TAZ Pro S | 17
4
Setting up C
ura LulzBot E
dition
4.4 The first print model, octo_gear_v1.stl , will automatically load onto Cura LulzBot Edition’s virtual print
bed the first time you run Cura LulzBot Edition with your LulzBot TAZ Pro S.
4.5 Locate the included sample coil of 1.75mm PLA filament. We strongly recommend using the included
PLA sample filament for your first print.
If the first print model is not present in the virtual print bed, you can download it from
download.LulzBot.com/3D_Models/TAZ_Workhorse_Samples/octo_gear_v1.stl or from the included SD card,
then load it onto the virtual print bed using the Open File button in the main Cura interface.
i
Filament is the term for the materials your LulzBot TAZ Pro S uses to 3D print objects. The included sample
filament, PLA, is made from natural renewable resources. PLA and other types of filament can be purchased at
LulzBot.com/filament.
i