LulzBot TAZ Pro S 3D Printer - Manual (Page 37)

LulzBot TAZ Pro S | 35
!
6
Starting Y
our First Prints
6.8 Once finished cooling to the proper removal temperature, the tool head will move to the top right and the
print bed will move forward. Once the print bed has stopped moving, remove your first print by gently sliding
a thin, flexible object under each side, then under the center of the print, until it separates from the bed.
If using a sharp object, exercise caution when using it. The blade can cut, gouge, or cause other damage to the
print surface. Caution should also be exercised to avoid causing personal injury during the print removal process.
Avoid prying prints up and away from the bed.