LulzBot TAZ Pro S 3D Printer - Manual (Page 8)

6 | LulzBot TAZ Pro S
2
Unpack your LulzBot TAZ Pro S Desktop 3D Printer
2.1 Place printer box on its side and carefully open the top of the box. Use the two black straps wrapped
around the printer to remove it from the box. Once it has been removed, open the straps by pulling on the
tabs.
2.2 After removing the protective
cardboard from the printer,
remove all additional contents.
Tool Kit
1.75mm PLA Filament Sample
USB Flash Drive USB Cable
Power Cord
1.75mm Guide Tube
2.85mm Guide Tubes