LulzBot TAZ Pro S 3D Printer - Manual (Page 25)

LulzBot TAZ Pro S | 23
5
Preparing to Print
5.6 Obtain the clear filament feed guide tube for 1.75mm filament from the additional contents you removed
from the box earlier. Insert the larger end of the feed guide into the top of the LulzBot Green filament sensor
marked 1. (Keep the other two included 2.85mm guide tubes in a safe place for future use with the optional
Pro Dual Extruder.)
Save the provided 2.85mm
filament guide tubes for use with
the optional Pro Dual Extruder.
!
 