LulzBot TAZ Pro S 3D Printer User Manual
Page 35
LulzBot TAZ Pro S
| 33
6
Starting Y
our First Prints
6.6
Once the hot end reaches its wiping temperature, the tool head will move to the wiper pad, cleaning the
nozzle of residual filament. After the nozzle has been cleaned, your LulzBot TAZ Pro S will heat to probing
temperature and conduct an automated self-leveling sequence by touching each of the four bed corners.
When the leveling process is complete, the printing process will commence.
If probing fails to detect one of
the bed corners, the printer will
attempt self-cleaning again,
then repeat probing. If this fails
three times, or if the bed corner
is visibly pushed down during
probing, the printer requires
manual nozzle cleaning. (Refer
to the Maintenance section at
the end of this guide for details
on nozzle cleaning.)
DO NOT use metal to clean the
nozzle.
!