Motorola DCT3412 - Manual (Page 19)

Installation 3-3
Video Connection Options
Use the following guidelines to determine the best video connection for the subscriber home
entertainment system. To determine the available video inputs on the TV, check the manual
supplied with the TV or the TV itself.
The DCT3412 offers the following video outputs:
Component
(Y Pb Pr) HDTV and
SDTV
The Y Pb Pr outputs provide component video, the most widely supported HD video
connection.
HDMI
or
IEEE 1394
HDTV and
SDTV
HDMI and IEEE 1394 offer higher quality HD video than component video. If the TV
has an HDMI or a DVI input, use the
HDMI output instead of the IEEE 1394 output.
HDMI and IEEE 1394 are video and audio connections. If you use HDMI or
IEEE 1394, no separate audio connection to the TV is required.
HDMI is compatible with DVI. If the TV has a DVI input, you can use an HDMI-to-
DVI converter cable to connect to the DCT3412
HDMI connector.
If you use IEEE 1394, on-screen graphics do not display.
S-Video SDTV only If your TV has an S-Video input, use S-Video. S-Video is the highest quality
standard-definition video output on the DCT3412.
Video
(composite) SDTV only If your TV does not have an S-Video input, use the composite video ( VIDEO ) output.
RF SDTV only If your TV only has a coaxial RF input, connect it to the DCT3412 RF OUT connector.
Audio Connection Options
Connect the stereo audio cable to the AUDIO R and L connectors on the DCT3412 and the audio
left and right connectors on the TV. If the equipment supports it, use the OPTICAL SPDIF or
coaxial digital SPDIF output instead of the AUDIO R and L outputs. In most cases, these outputs
offer better audio quality, including support for 5.1 Surround Sound.
When connecting to a home theater receiver, depending on its inputs, you can use the following
DCT3412 audio outputs:
OPTICAL SPDIF OR
COAXIAL SPDIF If the receiver supports it, use the OPTICAL SPDIF or coaxial SPDIF audio output to deliver
Dolby AC-3 audio to a Dolby Digital home theater receiver.
BASEBAND
AUDIO
R AND L
If the audio receiver does not support Dolby Digital, use the baseband AUDIO R and L
outputs to connect to the audio receiver.
The cabling diagrams show sample audio/video (A/V) connections to an audio receiver, where
the receiver functions as an A/V router. When connecting to an audio receiver, reference its
installation instructions for directions on connecting to baseband and SPDIF ports.
The VCR and TV receive their A/V signals from the currently selected input device on the audio
receiver. This is important when the subscriber has another A/V device such as a DVD player, a
secondary VCR, a CD player, or other electronic component. We recommend connecting the TV to
the monitor output so on-screen menus for the receiver can be displayed. (In many cases, the
receivers themselves have interactive on-screen menus.)
DCT3412 Installation Manual