Motorola DCT3412 User Manual
Page 65
Diagnostics 4-25
The fields are:
Field Description
DOCSIS Enabled
For a DOCSIS-enabled set-top, YES. Otherwise, NO.
Acquire DS
Channel
The DOCSIS downstream channel acquisition status:
YES — The downstream channel is acquired
NO — The set-top is acquiring the downstream channel
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
Obtain US
Parameters
The DOCSIS upstream channel descriptor (UCD) acquisition status:
YES — The UCD is acquired
NO — The set-top is acquiring the UCD or the downstream channel
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
Establish IP
Connectivity
Displays whether the cable modem has acquired its IP address, typically from a Dynamic
Host Configuration Protocol (DHCP) server:
YES — The IP address is acquired
NO — The set-top is acquiring its IP address
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
Obtain
Configuration
File
Displays whether the cable modem has downloaded its DOCSIS cable modem
configuration file from the TFTP server:
YES — The cable modem configuration file has been successfully downloaded
NO — The set-top is downloading its cable modem configuration file
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
eCM Registered
Displays whether the embedded cable modem has registered with the cable modem
termination system (CMTS):
YES — DOCSIS registration is complete
NO — DOCSIS registration is in progress or the set-top could not register
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
Network Access
Displays whether the cable modem has been granted access to the DOCSIS network:
YES — The cable modem was granted DOCSIS network access
NO — The set-top is obtaining DOCSIS network access
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
Initialize BPI
The Baseline Privacy Interface (BPI) status:
YES — BPI has been successfully initialized for the cable modem
NO — BPI initialization is in progress, has failed, or was not requested by the network
N/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled
System Up Time
The Days, Hours, Mins (minutes) and Seconds the DOCSIS system has been
operational. If the value is invalid or cannot be retrieved, or DOCSIS is not enabled, each
field displays zeros.
IP Addresses
The Cable Modem and Set-Top IP addresses in dotted-decimal format xxx.xxx.xxx.xxx.
Each byte value is padded with zeros when necessary. For example, 10.0.1.10 is
displayed as 010.000.001.010. If the value is invalid or cannot be retrieved, or DOCSIS is
not enabled, 000.000.000.000 is displayed.
MAC Addresses
The Cable Modem and Set-Top MAC address in hexadecimal format xx:xx:xx:xx:xx:xx.
Each byte value xx ranges from 00 to FF and is padded with zeros when necessary. For
example,0:0:2D:1:F1:D is displayed as 00:00:2D:01:F1:0D. If the value is invalid or cannot
be retrieved, or DOCSIS is not enabled, 00:00:00:00:00:00 is displayed.
DCT3412 Installation Manual