Motorola DCT3412 - Manual (Page 57)

Diagnostics 4-17
d11 Interface Status
The Interface Status diagnostic displays when running in base platform or Thin Client. There is
no LED display. The information on the OSD is updated when you display the diagnostic.
INTERFACE STATUS
DOCSIS TUNER & XMITTER: INST
1394 I/O DEVICE: NOT INST
ACTIVE PORTS 0
DATA XMISSION NO
5C IMPLEMENTATION 0
LOOP STATUS NO
ROOT STATUS YES
CYCLE MASTER STATUS YES
USB I/O DEVICE: INST
10BT ETHERNET DEVICE: INST
PARALLEL PORT: INST
IR BLASTER: INST
HARD DRIVE STATUS: INST
SMART CARD: INST
HDMI PORT
DEVICE CONNECTED: YES/NO
REPEATER: YES/NO
VIDEO XMISSION: ACTIVE/NOT ACTIVE
HDCP ENABLED: YES/NO
VIDEO CONSTRAINED YES/NO
OUTPUT FORMAT XXXX x XXXX
ASPECT RATIO: xx:x
EDID DATA
The Interface Status fields are:
Field Description
DOCSIS Tuner &
Xmitter INST (installed) or NOT INST (not installed)
1394 I/O Device INST (installed) or NOT INST (not installed)
USB I/O Device INST (installed) or NOT INST (not installed)
10BT Ethernet Device INST (installed) or NOT INST (not installed)
Parallel Port INST (installed) or NOT INST (not installed)
IR Blaster INST (installed) or NOT INST (not installed)
DCT3412 Installation Manual