Motorola DCT3412 - Manual (Page 25)

Installation 3-9
Connecting to a Stereo TV
Depending on the TV’s inputs:
If possible, use the S - VIDEO and AUDIO connectors on the DCT3412.
If the TV has no S-Video input, use the composite VIDEO and AUDIO connectors on the DCT3412.
If the TV has an RF input only, use the RF OUT connector on the cable terminal. The RF
connection carries video and audio.
Connecting a Stereo TV
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the cable
terminal.
1 Connect the stereo audio cable to the
AUDIO R and L connectors on the cable terminal and
the corresponding connectors on the stereo TV.
2 Connect an S-video cable to the
S - VIDEO connectors on the cable terminal and the TV. or
Connect a video cable to the VIDEO OUT connector on the cable terminal and the VIDEO IN
connector on the TV. or
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
cable terminal.
3 Connect an RF coaxial cable to the
RF OUT connector on the cable terminal and the RF
connector on the TV.
This video connection method does not support HD video. For more information, see
“Connecting an HDTV – Video Only.”
To connect to an audio receiver, such as a home mini system, follow a daisy-chain convention.
The A/V configuration illustrated (Figure 3-4) enables digital stereo recording, including Dolby
Surround sound. Use only one set of RCA input connectors on the stereo:
DCT3412 Installation Manual