Router stand, Position your router – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 11
Chapter 1. Hardware Setup
|
11
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Router Stand
For optimal wireless network performance, use the stand (included in the package) to
position your wireless router upright.
Reset
Factory
Settings
button
1.
Orient your wireless router vertically.
2.
Insert the tabs of the stand into the slots on the bottom of your wireless router as shown.
3.
Place your wireless router in a suitable area for installation (near an AC power outlet and
accessible to the Ethernet cables for your wired computers).
Position Your Router
The wireless router lets you access your network from virtually anywhere within the operating
range of your wireless network. However, the operating distance or range of your wireless
connection can vary significantly depending on the physical placement of your wireless
router. For example, the thickness and number of walls the wireless signal passes through
can limit the range. For best results, place your wireless router:
•
Near the center of the area where your computers and other devices operate, and
preferably within line of sight to your wireless devices.
•
So it is accessible to an AC power outlet and near Ethernet cables for wired computers.
•
In an elevated location such as a high shelf, keeping the number of walls and ceilings
between the wireless router and your other devices to a minimum.
•
Away from electrical devices that are potential sources of interference, such as ceiling
fans, home security systems, microwaves, PCs, or the base of a cordless phone or 2.4
GHz cordless phone.