NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 - Manual (Page 18)

18 | Chapter 2. Set Up Your Internet Connection
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Upgrade Firmware
When you log in, if you are connected to the Internet, the Firmware Upgrade Assistant screen
displays so you can upgrade to the latest firmware. See
Upgrade the Firmware on page 50 ,
for more information about upgrading firmware.
Click Yes to check for new firmware (recommended). The wireless router checks the
NETGEAR database for new firmware.
•
If no new firmware is available, click No to exit. You can check for new firmware later.
• If new firmware is available, click Yes to upgrade the wireless router with the latest
firmware. After the upgrade, the wireless router restarts.
CAUTION:
Do not try to go online, turn off the wireless router, shut down the
computer, or do anything else to the wireless router until the wireless
router finishes restarting and the Power LED has stopped blinking for
several seconds.
You cannot upgrade firmware until you have established your Internet connection as
described in
Setup Wizard on page 19.
Router Interface
The wireless router interface lets you view or change the wireless router settings. The left
column has menus, and the right column provides online help. The middle column is the
screen for the current menu option.
Help for the
current screen
Screen selected
Menus
Language
from the menu
(scroll
down to
view
more)
Figure 1. Router interface