Basic settings screen fields and buttons, Edit a network folder – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Page 60

Advertising
background image

60

|

Chapter 6. USB Storage

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Type \\readyshare in the address field of your Web browser.

Network/device name:

Share name:

\\readyshare

\\readyshare\USB_Storage

If you logged in to the wireless router before you connected your USB device, you might not
see your USB device in the wireless router screens until you log out and then log in again.

Basic Settings Screen Fields and Buttons

Network Device Name

. The default is \\readyshare. This is the name used to access the

USB device connected to the wireless router.

Folder Name

. Full path of the network folder.

Volume Name

. Volume name from the storage device (either USB drive or HDD).

Total/Free Space

. Shows the current utilization of the storage device.

Share Name

. You can click the name shown, or you can type it in the address field of

your Web browser.

If Not Shared is shown, then the default share has been deleted and no other share for
the root folder exists. Click the link to change this setting.

Read/Write Access

. Shows the network folder permissions and access controls.

-

All no password

allows all users to access the network folder.

-

admin

uses the same password that you use to log in to the wireless router.

Edit

. You can click the Edit button to edit the Available Network folder settings. See the

following section,

Edit a Network Folder

.

Safely Remove USB Device

. Click this button to safely remove the USB device attached

to your wireless router. See

Unmount a USB Drive

on page

63.

Edit a Network Folder

This process is the same from both the USB Storage (Basic Settings) and (Advanced
Settings) screens.

Advertising
This manual is related to the following products: