A. supplemental information, Factory settings, Appendix a – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 94: Supplemental information, Factory, Settings
Appendix A. Supplemental Information
|
94
A
A.
Supplemental Information
This appendix provides factory default settings and technical specifications for the N750
Wireless Dual Band Gigabit Router WNDR4000.
Factory Settings
You can return the wireless router to its factory settings. Use the end of a paper clip or some
other similar object to press and hold the Restore Factory Settings button on the bottom
of the router for at least 7 seconds. The wireless router resets, and returns to the factory
settings.
Your device returns to the factory configuration settings shown in the following
table.
Table 1. Factory Default Settings
Feature
Default Behavior
Router login
User login URL
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Port speed
Autosensing
Local network
(LAN)
LAN IP
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
Pacific time
Time zone Daylight Saving time
Disabled
Allow a registrar to configure this
router
Enabled