Remote management access – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Page 76

Advertising
background image

76

|

Chapter 7. Advanced Settings

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

3.

Click Add to add your computer’s MAC address so that you do not lose your wireless

connection when you click Apply. If you lose your wireless connection, you have to access

the wireless router from a wired computer or from a wireless computer that is on the access

control list. The following screen displays:

4.

If a wireless station that you want to add is connected to the network, select it from the

Available Wireless Cards list and click Add.

5.

You can enter MAC addresses manually. The MAC address is usually printed on the

wireless computer or device, or it might be in the wireless router’s DHCP table. The MAC

address is 12

hexadecimal digits.

You can copy and paste the MAC addresses from the wireless router’s Attached Devices
screen (see

View Attached Devices

on page

56) into the MAC Address field. This screen

shows computers connected to the network.

6.

Click Apply to save your settings.

Remote Management Access

The remote management feature allows you to upgrade or check the status of your
WNDR4000 router over the Internet.

Note:

Be sure to change the router’s default configuration password to a

very secure password. The ideal password should contain no
dictionary words from any language, and should be a mixture of
letters (both uppercase and lowercase), numbers, and symbols.
Your password can be up to 30 characters.

Advertising
This manual is related to the following products: