NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

Page 33

Advertising
background image

Chapter 3. Wireless Settings

|

33

N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual

2.

Select the Enable Guest Network check box to enable each guest network that you want

to use. Both 2.4 GHz b/g/n) and 5 GHz a/n are available.

3.

Specify the settings for the network.

You can specify whether the SSID broadcast is enabled, and whether you want to allow
guests to access your local network. You can also change the SSID.

NETGEAR strongly recommends that you change the SSID to a different name. Note
that the SSID is case-sensitive. For example, GuestNetwork is not the same as
Guestnetwork.

For guest networks, wireless security is disabled by default. NETGEAR strongly

recommends that you implement wireless security for the guest network.

4.

Select a security option for the guest network and specify the password.

5.

When you have finished making changes, click Apply.

Advertising
This manual is related to the following products: