Advanced usb settings, Wireless bridging and repeating networks – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 83
Chapter 7. Advanced Settings
|
83
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
•
The Internet connection is disconnected and disabled.
7.
Set up Internet Traffic Statistics to monitor the data traffic.
8.
Click the Traffic Status button if you want a live update on Internet traffic status on your
wireless router.
9.
Click Apply to save your settings.
Advanced USB Settings
For added security, you can specify that only approved USB devices are shared.
1.
Select Advanced > USB. The following screen displays:
2.
Select No and click Apply.
3.
To define the approved devices, click USB Approved Devices.
Wireless Bridging and Repeating Networks
With the wireless router, you can build large bridged wireless networks that form an
IEEE
802.11n Wireless Distribution System (WDS). Using the wireless router with other
access points (APs) and wireless devices, you can connect clients using their MAC
addresses rather than IP addresses. A repeater with wireless client associations sends all
traffic to the remote access point.