View or change wireless settings – NETGEAR N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
Page 30
30
|
Chapter 3. Wireless Settings
N750 Wireless Dual Band Gigabit Router WNDR4000 User Manual
View or Change Wireless Settings
Your wireless router comes set up with a unique wireless network name (SSID) and network
password. This information is printed on the label for your wireless router. You view or
change these settings in the Wireless Settings screen. You can also use this screen to set up
guest wireless networks.
To view or change wireless settings:
1.
Select Setup > Wireless Settings to display the following screen.
2.
Select the wireless network that you want to configure.
3.
Make any changes that are needed, and click Apply when done to save your settings.
Note:
The screen sections, settings, and procedures are explained in the
following sections.
4.
Set up and test your computers for wireless connectivity:
a.
Use your wireless computer or device to join your network. When prompted, enter the
network password.
b.
From the wirelessly connected computer, make sure that you can access the
Internet.