12 connect the edc harness to power and ground – Electronics International MVP-50T User Manual
Page 34
Advertising
3.12 Connect the EDC Harness to Power and Ground:
Route the power wire (Top Connector, pin 37, Red Wire) to the MVP/EDC 5-amp Circuit Breaker. Route the
ground wire (Top Connector, pin 19, Black Wire) to the aircraft ground.
29
Top
MVP RS422-B (pin 12)
MVP RS422+A (pin 13)
Pin 37, Red Wire
Pin 19 Black Wire
Pin 36, White Wire
Pin 18, White/Green Wire
MVP
RS422 Input
To Aircraft Ground
To the MVP/EDC 5-amp Circuit Breaker
EDC-33P
Top Connector
3.13 Route the EDC RS422 Wires to the MVP Connector:
Route the RS422+A white/green wire and the RS422-B white wire to the MVP connector. These wires will be
connected to the MVP RS422 wires in a later step. If a second EDC is installed, see the appendix for connec-
tion information.
Advertising