Electronics International MVP-50T - Manual (Page 49)

EDC Wiring Work Sheet
Middle Connector (Back View, Wire Side)
EDC Input
EDC Pin #'s
& Wire Colors Function Probe
Temp Ch 1 +In Pin 2 (Yel)
-In Pin 20 (Red)
EGT 1 P-110
Temp Ch 2 +In Pin 3 (Yel)
-In Pin 21 (Red)
EGT 2 P-110
Temp Ch 3 +In Pin 4 (Yel)
-In Pin 22 (Red)
EGT 3 P-110
Temp Ch 4 +In Pin 5 (Yel)
-In Pin 23 (Red)
EGT 4 P-110
Temp Ch 5 +In Pin 6 (Yel)
-In Pin 24 (Red)
EGT 5 (6-cyl) P-110 (6-cyl)
Temp Ch 6 +In Pin 7 (Yel)
-In Pin 25 (Red)
EGT 6 (6-cyl) P-110 (6-cyl)
Temp C h7 +In Pin 8 (Yel)
-In Pin 26 (Red)
OIL T P-120
Temp Ch 8
(Best for OAT)
+In Pin 9 (Yel)
-In Pin 27 (Red)
OAT P-128
Temp Ch 9 +In Pin 13 (Yel)
-In Pin 31 (Red)
Temp Ch 10 +In Pin 14 (Yel)
-In Pin 32 (Red)
CHT 1 P-100
Temp Ch 11 +In Pin 15 (Yel)
-In Pin 33 (Red)
CHT 2 P-100
Temp Ch 12 +In Pin 16 (Yel)
-In Pin 34 (Red)
CHT 3 P-100
Temp Ch 13 +In Pin 17 (Yel)
-In Pin 35 (Red)
CHT 4 P-100
Temp Ch 14 +In Pin 18 (Yel)
-In Pin 36 (Red)
CHT 5 (6-cyl) P-100
Temp Ch 15 +In Pin 19 (Yel)
-In Pin 37 (Red)
CHT 6 (6-cyl) P-100
An EDC Temp Channel may be configured to measure a temperature or other functions. See the "List of Allowable
Functions and Probes for the EDC Inputs" for more information.
Note: Any EDC Input not used should be marked "N/A" under Function. 0425051-1
ITT
Probe provided with
the Engine.
OIL Temp P-120 (5/8”-18)
Press Ch7
+5 Pin 36 (Red)
Gnd Pin 18(Blk)
+In Pin 19 (Grn)
-In Pin 37 (Wht)
Press Ch7 +5 (Red) Press Ch7 -In (Wht)
Press Ch7 Gnd (Blk) Press Ch7 +In (Grn)
EDC-33T EDC-33T EDC-33T EDC-33T EDC-33T MVP-50T-PT6 MVP-50T-PT6 MVP-50T-PT6 MVP-50T-PT6 MVP-50T-PT6
(1/4” - 28)
Note: Unused Pressure Inputs must be grounded.
Note: Temp Inputs may also be used to measure Digital or Analog signals.