5 [administrator settings, 1 [system settings, Power supply/power save settings – Konica Minolta bizhub 4050 User Manual
Page 31: Administrator settings, 5[administrator settings
5.1
[System Settings]
5
[Description of Utility Keys]
5-2
5
[Administrator Settings]
5.1
[System Settings]
[Power Supply/Power Save Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings]
Configure the settings on how to use the Power key and the machine action in Power Save mode.
Settings
Description
[Sleep Mode Setting]
Change the time period from when an operation has been completed on the
machine until when it automatically enters Sleep mode.
Sleep mode provides a greater power saving effect than Low Power mode.
However, the time required to return to Normal mode is longer than the time
required to recover from Low Power mode.
[20 min.] is specified by default.
[Power Key Setting]
Select whether to use the Power key on the Control Panel as a sub power
OFF key or as a power save key.
•
[Power Save]: Press the Power key briefly to shift to Power Save mode
(Low Power or Sleep mode). Hold down the Power key to turn the sub pow-
er off.
•
[Sub Power Off]: Press the Power key briefly to turn the sub power off. If
the Power key is held down, Power Save mode shifts to ErP Auto Power
Off mode (near the status when the main power is turned off), which offers
a greater power saving effect than that in Sub Power Off mode.
The default value depends on the region the machine is used in.
[Entering Power Save
Mode]
When this machine receives a print job from a fax machine or computer in
Power Save mode, select the timing to switch to Power Save mode after the
print job has completed.
•
[Normal]: Switches to Power Save mode based on the time specified in
[Low Power Mode Setting] or [Sleep Mode Setting].
•
[Immediately]: Switches to Power Save mode immediately after a print job
has ended.
[Immediately] is specified by default.
[Power Consumption in
Sleep Mode]
Select whether or not to reduce the power consumption in Sleep mode.
•
[Enabled]: Further reduces the power consumption in Sleep mode. Select
[Enabled] in normal conditions.
•
[Disabled]: Select this option when a smooth network communication is not
established while [Enabled] is enabled.
[Enabled] is specified by default.
[Low Power Mode Set-
ting]
Change the time period from when an operation has been completed on the
machine until when it automatically enters Low Power mode.
In Low Power mode, the display of the Touch Panel is turned off to reduce
power consumption.
[15 min.] is specified by default.
[Power Save Settings]
Select the type of power saving mode when pressing the Power key on the
Control Panel.
•
[Low Power]: Switches to Low Power mode. Turns off the Touch Panel
display to reduce power use.
•
[Sleep]: Switches to Sleep mode. Sleep mode provides a greater power
saving effect than Low Power mode. However, the time required to return
to Normal mode is longer than the time required to recover from Low Power
mode.
[Low Power] is specified by default.