Tx/rx settings, Function settings, Tx/rx settings] -22 [function settings] -22 – Konica Minolta bizhub 4050 User Manual
Page 51
5.8
[Fax Settings]
5
[Description of Utility Keys]
5-22
[TX/RX Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [TX/RX Settings]
Specify how to print faxes received and how to handle files in a polling transmission.
[Function Settings]
To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings]
Configure the settings for using various fax transmission and reception functions.
Settings
Description
[Duplex Print (RX)]
Select whether or not to print an original on both sides of paper when a multi-
page fax is received.
This option is not available if [Print Separate Fax Pages] is set to [ON].
[OFF] is specified by default.
[Inch Paper Priority
Over A4]
Select whether or not to preferentially print an original on inch-sized paper
when a fax is received.
The default value depends on the region the machine is used in.
[Print Paper Selection]
Select the criterion of selecting paper for printing a fax.
•
[Auto Select]: Prints a fax on paper that is automatically selected to suit the
fax received.
•
[Fixed Size]: Print a fax only on the paper specified in [Print Paper Size].
•
[Priority Size]: Prints a fax on paper specified in [Print Paper Size]. If the ma-
chine runs out of specified paper, paper of the next closest size is used.
[Auto Select] is specified by default.
[Print Paper Size]
Select size of paper for printing received fax.
The initial value varies depending on the setting for [Inch Paper Priority Over
A4].
Note
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to
[Auto].
[Tray Selection for RX
Print]
Specify a paper tray if you want to fix the paper tray used to print a fax.
[Auto] is specified by default.
[Reduction Ratio]
If necessary, change the reduction ratio that is used when printing a fax.
[96%] is specified by default.
Note
If [Reduction Ratio] is set to [100%], [Print Paper Selection] is set to [Auto Se-
lect], [Tray Selection for RX Print] to [Auto] and [Print Separate Fax Pages] to
[OFF].
[Print Separate Fax
Pages]
Select whether or not to print a fax longer than the standard size on separate
pages.
This option is not available if [Duplex Print (RX)] is set to [ON].
[OFF] is specified by default.
[File After Polling TX]
Select whether or not to delete a file after it is sent in response to a polling re-
quest if Polling TX is used to register files for polling.
[Delete] is specified by default.
Settings
Description
[Function ON/OFF Set-
ting]
Enable or disable fax transmission and reception functions, such as Confirm
Address that prevents wrong fax transmission, F-Code TX, and Relay RX.