Konica Minolta bizhub 4050 - Manual (Page 61)

5.10 [Security Settings] 5
[Description of Utility Keys] 5-32
[Stamp Settings]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [Stamp Settings]
Select whether or not to force application of stamps to original data when printing or sending a fax.
Tips
[Stamp] cannot be specified together with [Distribution Control Number]. If both options are specified togeth-
er, the first specified item is canceled.
[FIPS Settings]
To display: [Utility] - [Administrator Settings] - [Security Settings] - [FIPS Settings]
Specify whether to enable the FIPS (Federal Information Processing Standardization) Mode.
FIPS defines security requirements for cryptographic modules. These standards are adopted by many organ-
izations, including U.S. federal government agencies. Enabling the FIPS Mode makes the functions of the
machine conform to the FIPS.
[Invalid] is specified by default.
Tips
- If you enable the FIPS mode, the device certificate registered on this machine will be deleted.
- If the Enhanced Security Mode is enabled, the FIPS mode cannot be enabled.
Settings Description
[Date/Time] Select [ON] to print the date/time.
•
[Data Format] : Select the format to print the date.
• [Time Format]: Select the format to print the time.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
[Page Number] Select [ON] to print page numbers.
•
[Page Number Type] :Select the format to print page numbers.
• [Starting Page Number]: Enter the starting number of page numbers to be
printed on the first page using the Keypad.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
[Stamp] Select [ON] to print a stamp.
•
[Stamp Imprint] : Select the stamp to be printed.
• [Text Details]: Specify the size of the text to be printed.
• [Print Position]: Select the position where to print the text.
[OFF] is specified by default.
[Distribution Control
Number] Select [ON] to print out distribution control numbers.
•
[+]/[-]: Enter the starting number of distribution control numbers using the
[+] or [-] key or the Keypad.
• [Text Size]: Specify the size of the text to be printed.
• [Density]: Select the density of the text to be printed.
[OFF] is specified by default.