Konica Minolta bizhub 4050 - Manual (Page 47)

5.7 [Printer Settings] 5
[Description of Utility Keys] 5-18
[Emulation]
To display: [Utility] - [Administrator Settings] - [Printer Settings] - [Emulation]
Specify the default printer language or font.
[Halftone] Select the halftone processing method for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
•
[Line Art]: Intermediate colors are reproduced with high precision.
• [Details]: Intermediate colors are reproduced in detail.
• [Smooth]: Intermediate colors are reproduced smoothly.
The following shows the default settings.
•
[Image Printing]: [Details]
• [Text Printing]: [Line Art]
• [Graphics Printing]: [Details]
[Edge Enhancement] Select whether or not to sharpen edges for each of the [Image Printing], [Text
Printing], and [Graphics Printing] categories.
The following shows the default settings.
•
[Image Printing]: [OFF]
• [Text Printing]: [ON]
• [Graphics Printing]: [ON]
[Edge Strength] Select the degree of edge enhancement when sharpening the edges.
[Medium] is specified by default.
[Economy Print] Select whether or not to adjust the printing density in order to save the amount
of toner consumed.
[OFF] is specified by default.
[Gradation Adjustment] Adjust gradation when reproduction quality of the printed image is degraded.
[Density] Adjust the density of black in highlight portions, intermediate portions, and
shadow portions.
[0] is specified by default in every case.
[Print Darkness Adjust-
ment] Adjust the shading of a printed image.
[0] is specified by default.
Settings Description
Settings Description
[Default Emulation] Select the Page Description Language. When you select [Auto], this machine
automatically switches between PCL and PS.
[Auto] is specified by default.
[PS Setting] Configure the PS print settings.
[Wait Timeout] Specify the time-out period after it is judged as a PS error.
If you select [0], time-out will not work.
[0] is specified by default.
[Print PS Errors] Specify whether or not to print error information when an error occurs during
PS rasterization.
[OFF] is specified by default.
[PS Protocol] Select the protocol that is used for PS data communication.
If you select [Auto], an appropriate protocol is automatically determined from
the PS print jobs.
[Auto] is specified by default.
[PCL Settings] Configure the PCL settings.