Pbx connection settings, Report settings, Pbx connection settings] -24 [report settings] -24 – Konica Minolta bizhub 4050 User Manual

Page 53

Advertising
background image

5.8

[Fax Settings]

5

[Description of Utility Keys]

5-24

[PBX Connection Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [PBX Connection Settings]

Select whether or not to connect this machine to a Private Branch Exchange (PBX) environment.

When connecting to a Private Branch Exchange (PBX) environment, enter the outside line number.

[OFF] is specified by default.

Tips

When this machine is connected to a Private Branch Exchange (PBX) environment, you can issue an outgoing
call to the outside without using [PBX Connection Settings]. In this case, type in P (pause) and recipient's
telephone number following the outside line number (number to connect from PBX to the outside).

[Report Settings]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Report Settings]

Specify the conditions for printing fax-related reports.

[Enable Settings]

Select whether or not to use the TSI Routing function.
[OFF] is specified by default.

[Print After Receive]

Select whether or not to print a received fax after it has been received.
[NO] is specified by default.

[TSI User Box Reg-
istration]

Register forwarding destinations for each sender's fax number (TSI). Select a
desired registration number, then tap [Edit].

[Sender (TSI)]: Specify a sender's fax number.

[Forwarding Destination]: Tap the list icon, then select the desired destina-
tion (SMB, FTP, or E-mail (Internet fax) destination).

[Action when TSI
User Box is not set.]

Select the action to be taken by the machine if a fax number (TSI) is not regis-
tered and no forwarding destination is received.

[Automatically Print]: Prints a received fax without saving it in a box.

[Memory RX User Box]: Saves received documents in Memory RX User
Box.

[Automatically Print] is specified by default.

[Nighttime RX Settings]

Configure the settings for using the Night RX function.

[Night Fax RX Print]

Select whether or not to use the Night RX function.
[OFF] is specified by default.

[Night RX Start
Time]

Enter the starting time of the nighttime zone.
[00:00] is specified by default.

[Night RX End Time]

Enter the ending time of the nighttime zone.
[00:00] is specified by default.

Settings

Description

Settings

Description

[Activity Report]

Specify the method to print a report (activity report) that contains results of fax-
es sent and received.

Advertising
This manual is related to the following products: