List/counter, Priority tray, Reset settings – Konica Minolta bizhub 4050 User Manual
Page 34
[Description of Utility Keys]
5-5
5.1
[System Settings]
5
[List/Counter]
To display: [Utility] - [Administrator Settings] - [System Settings] - [List/Counter]
Prints the job setting list of this machine and configure the paper count.
[Priority Tray]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Priority Tray]
Select a tray to be used with top priority.
If paper of the same size is loaded in multiple trays, paper is fed from the tray with top priority.
[Tray 1] is specified by default.
[Reset Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Reset Settings]
Select whether or not to reset the functions and settings that are currently displayed when this machine has
not been operated for a certain period of time.
[New Release]
Reset the counter value after replacing the Maintenance Kit or installing the
Finisher.
Settings
Description
Settings
Description
[Management List] -
[Job Settings List]
Prints a list of settings for [User Settings] and [Administrator Settings] among
others.
[Activity Report]
Print a report that contains sending and receiving records.
[User Account Counter
List Page]
Print a report that contains counter information.
[Scan TX Report]
Prints a report that contains scan sending records.
Settings
Description
[System auto reset]
Select whether or not to reset all settings (except registered settings) when this
machine has not been operated for a certain period of time.
[Priority Mode]
Select a function that is to be displayed in preference after the settings have
been reset.
[Home] is specified by default.
[System Auto Reset
Time]
Enter the amount of time that elapses until the selected function is reset.
[1 min.] is specified by default.
[Auto Reset]
Select whether or not to reset all settings (except registered settings) for each
of Copy, Fax, and Scan functions when this machine has not been operated
for a certain period of time.
To reset them, set the amount of time that elapses before the settings are re-
set.
[1 min.] is specified by default.