Kinze Grain Carts Rev. 7/14 - Manual (Page 21)

TM
Grain Cart M0238-01
5/12 2-7
Operation
AUGER INSPECTION COVER
DANGER!
Never open inspection cover while PTO and/or augers are running.
Grain Carts are equipped with two inspection covers one at the bottom of the vertical auger and one located on the grain
transfer that are used for clean out purposes.
The inspection covers should be removed any time total clean out of the wagon is required, such as when changing
crops, to preserve grain identity, or in preparation for storage.
At the end of each season or after extended use, the inspection covers should be removed and the auger chamber
cleaned of all debris and accumulated grain to prevent rust and mold.
Reinstall covers and tighten hardware evenly after clean out is complete.
Vertical Auger Cleanout door Horizontal Auger Cleanout door