Specifications, Specifications -3 – Kinze Grain Carts Rev. 7/14 User Manual
Page 9
TM
Grain Cart
M0238-01
5/12
1-3
Specifications
900 Grain Cart
Feature
Specification
Total Capacity*
900 Bushels
Bushels/Minute - Average*
500 Bushels/minute
Vertical Auger
20" Dia flighting in 23½" Dia. tube; ¼" T edge; ⅜" T root flighting. 10° auger position
control. Lower portion of lower vertical auger hard faced flighting.
Bearings - Vertical Auger
2"
Horizontal Auger
20" LH ¼"T edge; ⅜" T Root flighting.
Bearings - Horizontal Auger
6-bolt (rear) cast iron hubs with tapered roller bearings, (front) 2" ball bearing.
Gearbox
Bevel & spur gear with 2:1 ratio.
Drive Belts
Two 4-band, multi-strand V-belts.
Drive Sheaves
Eight groove - 7½" drive/15" driven.
PTO - 1000 RPM
PTO auger drive with overrunning and torque limiting clutch.
PTO Yoke
1⅜"-21 spline or 1¾"-20 spline.
Spindle
Two 4½" high alloy.
Hub
20 bolt 13.189 bolt center (2) cast ductile iron.
Safety Chains
Two ½" 40,500 lbs rated, grade 70, certified to ASAE S338.5.
Adjustable Discharge Spout
Remotely adjustable spout with +/- 14° of up/down motion and fitted with flexible
discharge nozzle.
Tire Size/Pressure
66/43.00-25 (20 Ply) R-1 35 PSI (241 kPa) Min. 40 PSI (275 kPa) Max.
Hydraulic Requirements
5 SCVs (manual) or 2 SCV's (remote) with standard 2320 minimum system psi.
Weight - Empty
21,776 lbs.
Hitch Weight - Empty
3,400 lbs.
Hitch Weight - Loaded
5,000 lbs.
Transport Width
13'-0"
Width - Grain Tank
12'-0"
Length - Grain Tank
18'-6"
Height - Grain Tank
10'-11"
Length - Overall
27'-11
Height - Grain Discharge
13'-2"
* Approximate with 15% moisture corn. Capacity and bushels/minute will vary with moisture content of grain and/or
PTO RPM.