Dell PowerEdge VRTX - Manual (Page 126)

126 Clock Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\Clock.fm
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 4 / 3 /1 4 - FO R P R O O F O N LY
Syntax
sntp anycast client enable
Parameters
N/A
Default Configuration
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use this command to enable the SNTP Anycast client.
Example
The following example enables SNTP Anycast clients.
console(config)# sntp anycast client enable
sntp client enable
The sntp client enable Global Configuration mode command enables the
SNTP Broadcast and Anycast client. Use the no form of this command to
disable the SNTP Broadcast and Anycast client.
Syntax
sntp client enable interface-id
no sntp client enable interface-id
Parameters
• interface-id —Specifies an interface ID, which can be one of the following
types: Ethernet port, Port-channel or VLAN.
Default Configuration
The SNTP client is disabled on an interface.