Dell PowerEdge VRTX - Manual (Page 467)

LLDP Commands 467
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\LLDP.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
lldp notifications interval
Use the lldp notifications interval Global Configuration mode command to
configure the maximum transmission rate of LLDP notifications. Use the no
form of this command to return to the default.
Syntax
lldp notifications interval seconds
no lldp notifications interval
Parameters
interval seconds —The device does not send more than a single notification in
the indicated period (range: 5–3600).
Default Configuration
5 seconds
Command Mode
Global Configuration mode
Example
console(config)# lldp notifications interval 10
lldp med
Use the lldp med Interface (Ethernet) Configuration mode command to
enable or disable LLDP Media Endpoint Discovery (MED) on a port. Use the
no form of this command to return to the default state.
Syntax
lldp med { enable [ tlv … tlv4 ] | disable }
no lldp med
Parameters
• enable—Enable LLDP MED