Dell PowerEdge VRTX - Manual (Page 343)

802.1X Commands 343
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC2_latest\802_1X.fm
D E LL CO N F I D E N T IA L – P R E L I M I N A RY 4 / 3 / 14 - F O R PR O O F O N LY
Default Configuration
Disabled.
Command Mode
Global Configuration mode
Example
The following example enables 802.1X globally.
console(config)# dot1x system-auth-control
dot1x timeout quiet-period
Use the dot1x timeout quiet-period Interface Configuration mode command
to set the time interval that the device remains in a quiet state following a
failed authentication exchange (for example, if the client provided an invalid
password). Use the no form of this command to restore the default
configuration.
Syntax
dot1x timeout quiet-period seconds
no dot1x timeout quiet-period
Parameters
• seconds —Specifies the time interval in seconds that the device remains in
a quiet state following a failed authentication exchange with a client.
(Range: 10–65535 seconds).
Default Configuration
The default quiet period is 60 seconds.
Command Mode
Interface (Ethernet) Configuration mode